VESTAKEEP PEEK
VESTAKEEP 4000 CF20
VESTAKEEP 4000 CF30
VESTAKEEP 4000 GF15
VESTAKEEP 4000 GF30
VESTAKEEP 4000 FC30
VESTAKEEP 4000 CC20
Packing:25kg/carton
Description:
VESTAKEEP PEEK is one of the highest performance thermoplastics. Its chemical resistance is similar to PPS (polyphenylene sulfide), but PEEK can operate at higher temperatures, retaining its excellent mechanical properties at continuous-use temperatures up to 240 °C (464 °F). Of all plastics, PEEK offers the best combination of inertness and heat resistance. This high-performance polymer retains its original properties, Extremely low levels of extractables, outgassing,and contaminants make PEEK an excellent material for wafer handling in semiconductor production.
VESTAKEEP compounds properties:
very high heat resistance
high rigidity
low water absorption and therefore
high dimensional stability
high hardness
good strength
excellent sliding friction behavior,
minimal abrasion
good electrical characteristics
excellent chemical resistance
excellent hydrolytic stability
good processability
low tendency to form stress cracks
Processing:
VESTAKEEP PEEK molding compounds have extremely high oxidative stability in the melt and can be used continuously at temperatures exceeding 260°C. We recommend a melt temperature between 360°C and 380°C during the injection molding process. The mold temperature should be within a range of 160°C to 200°C, preferably 180°C.
Application:
VESTAKEEP compounds can be used for a wide range of applications, such as in electrical, electronic, and communications engineering and in the automotive industry.
we can give discount according to order quantity.
We also have good experience in transportation both by air and ocean to overseas.
VESTAKEEP 4000 CF20
VESTAKEEP 4000 CF30
VESTAKEEP 4000 GF15
VESTAKEEP 4000 GF30
VESTAKEEP 4000 FC30
VESTAKEEP 4000 CC20
Packing:25kg/carton
Description:
VESTAKEEP PEEK is one of the highest performance thermoplastics. Its chemical resistance is similar to PPS (polyphenylene sulfide), but PEEK can operate at higher temperatures, retaining its excellent mechanical properties at continuous-use temperatures up to 240 °C (464 °F). Of all plastics, PEEK offers the best combination of inertness and heat resistance. This high-performance polymer retains its original properties, Extremely low levels of extractables, outgassing,and contaminants make PEEK an excellent material for wafer handling in semiconductor production.
VESTAKEEP compounds properties:
very high heat resistance
high rigidity
low water absorption and therefore
high dimensional stability
high hardness
good strength
excellent sliding friction behavior,
minimal abrasion
good electrical characteristics
excellent chemical resistance
excellent hydrolytic stability
good processability
low tendency to form stress cracks
Processing:
VESTAKEEP PEEK molding compounds have extremely high oxidative stability in the melt and can be used continuously at temperatures exceeding 260°C. We recommend a melt temperature between 360°C and 380°C during the injection molding process. The mold temperature should be within a range of 160°C to 200°C, preferably 180°C.
Application:
VESTAKEEP compounds can be used for a wide range of applications, such as in electrical, electronic, and communications engineering and in the automotive industry.
we can give discount according to order quantity.
We also have good experience in transportation both by air and ocean to overseas.